content loaded
BRADFORD RE112T6-1NCP-458 Image 1

BRADFORD RE112T6-1NCP-458 12USG 3KW 240V WATER HEATER

MFR Part #: RE112T6-1NCP-458
SKU #: 3264185
Brand: Bradford White®
UPC: 671632839025
Bradford White® RE112T6-1NCP Utility Electric Water Heater, 12 gal Tank, 208 V AC, 3 kW Power Rating, 1 Phase , Domestic
6 Years Limited on Tank/6 Years Limited on Component Parts
Temperature and Pressure Relief Valve
Residential Application
AHRI Certified | CEC Listed | cETLus Listed | CSA C191.1-M90 | Massachusetts Approved | NSF 372 | UL 1453 | UL 174 | PROP65: Cancer and Reproductive Harm - www.P65warnings.ca.gov

Bradford White® Electric Water Heater, Utility, Series: RE112T6, 12 gal Tank, 208 V AC, 3 kW Power, 1 ph, 3/4 in NPT Water Connection, (1) Screw-In Copper Heating Element, 7 gph Recovery Rate, 150 psi Pressure, ASME Yes/No: No, Steel, 14 in Dia x 27-3/4 in H Dimensions, Domestic

The -458 indicates that this SKU was designed and certified for Installation in Canada.

Bradford White 12 Gallon Residential Electric Utility Water Heater. 6-Year Tank Warranty, 3 kW, 240 Volts, Single Phase.

Product Details

Bradford White® Electric Water Heater, Utility, Series: RE112T6, 12 gal Tank, 208 V AC, 3 kW Power, 1 ph, 3/4 in NPT Water Connection, (1) Screw-In Copper Heating Element, 7 gph Recovery Rate, 150 psi Pressure, ASME Yes/No: No, Steel, 14 in Dia x 27-3/4 in H Dimensions, Domestic

The -458 indicates that this SKU was designed and certified for Installation in Canada.

Bradford White 12 Gallon Residential Electric Utility Water Heater. 6-Year Tank Warranty, 3 kW, 240 Volts, Single Phase.

Features

  • Fully automatic thermostat control: Fast acting surface-mount thermostat for automatic temperature control
  • Factory installed sensitive manual reset energy cut-off for safety to prevent overheating
  • Direct heat transfer with a single immersed element: Transfers heat directly and efficiently to the water
  • Vitraglas® lining
  • Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F
  • 1 in non-CFC foam insulation: covers the sides and top of the tank, reducing the amount of heat loss
  • Results in less energy consumption, improved operation efficiencies and jacket rigidity
  • Water connections: 3/4 in NPT factory-supplied true dielectric fittings extend water heater life
  • Located on the side for easier installation (Fittings packaged separately inside carton)
  • Protective magnesium anode rod: Provide added protection against corrosion for long-term, trouble free service
  • Design evaluated by ETL in accordance with Part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency
  • Alternate top water connections
  • Non-simultaneous operation

Store Hours

Monday - Friday: 8:00am - 5:00pm Saturday: 9:00am - 5:00pm

Location

17111 118 Ave NW
Edmonton, AB T5S 2V3


Phone

780-451-2432

© 2026 Best Plumbing & Lighting. All Rights Reserved.