B&G 103351LF NBF-33 LEAD FREE BRONZE CIRCULATOR PUMP
Product Details
Features
Resources
Bell & Gossett Wet Rotor Circulator Pump, Series: NBF™, 26 gpm, 12 ft Maximum Head, 125 W, 115 V AC, 1.1 A, 60 Hz, 1 ph, 150 psi Maximum, 2950 rpm Motor, In-Line Mount, 225 deg F, 5-1/8 in W x 6-3/16 in D x 6-3/8 in H
A series of in-line wet rotor circulation pumps designed specifically for quiet operation in open (potable) water systems. These pumps have 100% lead-free bronze bodies. Flanged, union and sweat models are available.
- 100 percent lead-free bronze pump body NBF, Noryl impeller, ceramic shaft and double-sintered carbon bearings
- Pumps shall be of the horizontal system lubricated type specifically designed and guaranteed for quiet operation
- Pumps shall have a ceramic shaft supported by carbon bearings
- Pump body shall be lead-free bronze for NBF circulators
- Motor stator to be isolated from circulating fluid through use of stainless steel can
- Motors shall be non-overloading at any point on the pump curve
- Contains less than 0.25% lead content by weight on wetted surface
- 3/4, 1, 1-1/4 and 1-1/2 in NPT flange
- Construction: Lead free bronze pump body, Noryl™ impeller, ceramic shaft, carbon bearings
Product Details
Bell & Gossett Wet Rotor Circulator Pump, Series: NBF™, 26 gpm, 12 ft Maximum Head, 125 W, 115 V AC, 1.1 A, 60 Hz, 1 ph, 150 psi Maximum, 2950 rpm Motor, In-Line Mount, 225 deg F, 5-1/8 in W x 6-3/16 in D x 6-3/8 in H
A series of in-line wet rotor circulation pumps designed specifically for quiet operation in open (potable) water systems. These pumps have 100% lead-free bronze bodies. Flanged, union and sweat models are available.
Features
- 100 percent lead-free bronze pump body NBF, Noryl impeller, ceramic shaft and double-sintered carbon bearings
- Pumps shall be of the horizontal system lubricated type specifically designed and guaranteed for quiet operation
- Pumps shall have a ceramic shaft supported by carbon bearings
- Pump body shall be lead-free bronze for NBF circulators
- Motor stator to be isolated from circulating fluid through use of stainless steel can
- Motors shall be non-overloading at any point on the pump curve
- Contains less than 0.25% lead content by weight on wetted surface
- 3/4, 1, 1-1/4 and 1-1/2 in NPT flange
- Construction: Lead free bronze pump body, Noryl™ impeller, ceramic shaft, carbon bearings