Welcome to our new website! If you run into any problems or have feedback to share, feel free to email us at [email protected] - we truly value your input!
content loaded
TACO 0015E3-2F4 VARIABLE SPEED CIRCULATION PUMP
MFR Part #: 0015e3-2F4
SKU #: 1282978
Brand: Taco® Comfort Solutions™
UPC: 190145007870
Taco® 0015e3-2F4 00e Cast Iron Variable Speed Circulator, 16 gpm Flow Rate, 1-1/2, 3/4, 1, 1-1/4 in Inlet x 1-1/2, 3/4, 1, 1-1/4 in Outlet, 115 V, 1 Phase
3 Years
Integral Flow Check (IFC)
For Water or maximum of 50% water/glycol solution, Indoor use only, Domestic water recirculation, Open loop potable water and Closed loop hydronic systems
UL Listed
Product Details
Attributes
Features
Resources
Taco®, 0015e3-2F4, Variable Speed Circulator, Cast Iron, Series: 00e, 16 gpm Flow Rate, 1-1/2, 3/4, 1, 1-1/4 in Inlet, 1-1/2, 3/4, 1, 1-1/4 in Outlet, 18 ft Maximum Head, 1/25 hp Power, 115 V, 0.54 A, 60 Hz Frequency, 1 ph, 125 psi Maximum, 1590 to 4830 rpm Motor, 125 psi Case, Composite Impeller, Universal Flange Mounting, 40 to 230 deg F, Carbon Bearing, 6-3/8 in H x 6 in W x 6 in D Dimensions
The 0015e3 is a variable speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. Its ECM performance is equivalent to the Taco 0015 3-Speed circulator. It is ideal for hydronic systems zoned with circulators or zone valves or used on potable water systems for domestic water recirculation. The 0015e3 is not suitable for chilled water systems.
Maximum Head:18 ft
Series:00e
Type:Cast Iron
Voltage Rating:115 V
Amperage Rating:.54 A
Bearing Type:Carbon
Case Pressure Rating:125 psi
Dimensions:6-3/8 in H x 6 in W x 6 in D
Flow Rate:16 gpm
Frequency Rating:60 Hz
Impeller Type:Composite
Inlet Size:1-1/2, 3/4, 1, 1-1/4 in
Maximum Pressure:125 psi
Motor Speed:1590 to 4830 rpm
Mounting Type:Universal Flange
Outlet Size:1-1/2, 3/4, 1, 1-1/4 in
Phase:1
Power Rating:1/25 hp
Temperature Rating:40 to 230 deg F
- Replaces all 3-speed hydronic circulators in its class
- High-efficiency ECM motor uses up to 85% less electricity
- SureStart® automatic unblocking and air purging mode
- Green Mode active system monitoring and automatic power optimization
- Nut-grabber feature on flanges for easier fit-up
- Double insulated - No ground wire required
- Whisper quiet operation
Product Details
Taco®, 0015e3-2F4, Variable Speed Circulator, Cast Iron, Series: 00e, 16 gpm Flow Rate, 1-1/2, 3/4, 1, 1-1/4 in Inlet, 1-1/2, 3/4, 1, 1-1/4 in Outlet, 18 ft Maximum Head, 1/25 hp Power, 115 V, 0.54 A, 60 Hz Frequency, 1 ph, 125 psi Maximum, 1590 to 4830 rpm Motor, 125 psi Case, Composite Impeller, Universal Flange Mounting, 40 to 230 deg F, Carbon Bearing, 6-3/8 in H x 6 in W x 6 in D Dimensions
The 0015e3 is a variable speed, high-efficiency wet rotor circulator with an ECM permanent magnet motor. Its ECM performance is equivalent to the Taco 0015 3-Speed circulator. It is ideal for hydronic systems zoned with circulators or zone valves or used on potable water systems for domestic water recirculation. The 0015e3 is not suitable for chilled water systems.
Attributes
Maximum Head: 18 ft
Series: 00e
Type: Cast Iron
Voltage Rating: 115 V
Amperage Rating: .54 A
Bearing Type: Carbon
Case Pressure Rating: 125 psi
Dimensions: 6-3/8 in H x 6 in W x 6 in D
Flow Rate: 16 gpm
Frequency Rating: 60 Hz
Impeller Type: Composite
Inlet Size: 1-1/2, 3/4, 1, 1-1/4 in
Maximum Pressure: 125 psi
Motor Speed: 1590 to 4830 rpm
Mounting Type: Universal Flange
Outlet Size: 1-1/2, 3/4, 1, 1-1/4 in
Phase: 1
Power Rating: 1/25 hp
Temperature Rating: 40 to 230 deg F
Features
- Replaces all 3-speed hydronic circulators in its class
- High-efficiency ECM motor uses up to 85% less electricity
- SureStart® automatic unblocking and air purging mode
- Green Mode active system monitoring and automatic power optimization
- Nut-grabber feature on flanges for easier fit-up
- Double insulated - No ground wire required
- Whisper quiet operation