Notice: We’re making improvements to our website! During this transition, pricing and inventory information may contain discrepancies until September 2026. More details here.
content loaded
MASTERS ABS250-X ABS-PRO-X MEDIUM/FAST YELLOW CEMENT 237ML
MFR Part #: ABS250-X
SKU #: 1308660
Brand: Oatey | MASTERS®
UPC: 067001022448
Please note this item is discontinued (order fulfillment will depend on stock availability): MASTERS® ABS250-X Medium Body Fast Set Cement, 237 mL Container, Yellow, For Use With On all schedules and classes of ABS pipe and fittings up to 6 in dia with interference fit
Non-Pressure Applications
CSA B181.1|ASTM D2235|NSF 14 for DWV and Sewer|APMO Listed|Meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and Various Environmental Requirements
Product Details
Attributes
Features
Resources
MASTERS®, ABS250-X, Cement, Medium Body Fast Set, 237 mL Container, For Use With: On all schedules and classes of ABS pipe and fittings up to 6 in dia with interference fit, Yellow, Solvent Odor/Scent, Composition: Styrene/Butadiene/Acrylonitrile Copolymer/Methyl Ethyl Ketone, 5 to 6, 3 to 4, 1 to 2 min Setting, 40 to 110 deg F
Container Type:Can
Composition:Styrene/Butadiene/Acrylonitrile Copolymer/Methyl Ethyl Ketone
Odor/Scent:Solvent
Setting Time:5 to 6, 3 to 4, 1 to 2 min
Suitable For Use With:On all schedules and classes of ABS pipe and fittings up to 6 in dia with interference fit
- Cut pipe ends square chamfer and clean pipe ends
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
- Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
- Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
- Apply a second coat of cement to the pipe
- Assemble parts quickly as cement must be in a fluid state when joining
- Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
- Wipe off excess cement for a clean esthetic appearance
- Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping
Product Details
MASTERS®, ABS250-X, Cement, Medium Body Fast Set, 237 mL Container, For Use With: On all schedules and classes of ABS pipe and fittings up to 6 in dia with interference fit, Yellow, Solvent Odor/Scent, Composition: Styrene/Butadiene/Acrylonitrile Copolymer/Methyl Ethyl Ketone, 5 to 6, 3 to 4, 1 to 2 min Setting, 40 to 110 deg F
Attributes
Container Type: Can
Composition: Styrene/Butadiene/Acrylonitrile Copolymer/Methyl Ethyl Ketone
Odor/Scent: Solvent
Setting Time: 5 to 6, 3 to 4, 1 to 2 min
Suitable For Use With: On all schedules and classes of ABS pipe and fittings up to 6 in dia with interference fit
Features
- Cut pipe ends square chamfer and clean pipe ends
- Check dry fit of pipe and fitting. Pipe should easily go 1/3 of the way into the fitting. If pipe bottoms it should be snug
- Use a suitable applicator at least 1/2 the size of the pipe diameter
- Clean and prepare pipe and fitting with a listed Cleaner or Primer where local code requires
- Apply a liberal coat of cement to pipe approximately the depth of the socket. Leave no uncoated surface
- Apply a coat of cement to the inside of the fitting avoid pooling or puddling of cement
- Apply a second coat of cement to the pipe
- Assemble parts quickly as cement must be in a fluid state when joining
- Push pipe fully into the fitting using a 1/4 turning motion until the pipe bottoms
- Hold pipe and fitting together for 30 seconds to prevent pipe push-out longer in lower temperatures
- Wipe off excess cement for a clean esthetic appearance
- Allow cement to fully cure before pressure testing. Longer cure times may be required at lower temperatures or for larger diameter piping