MASTERS PD500BT PRO-DOPE W/TEFLON
Product Details
Features
Resources
MASTERS® PRO-DOPE® PTFE Pipe Thread Sealant, Brush Top Cap Container, 500 mL Container, Composition: Crystalline Silica, Quartz, Propylene Glycol N-Butyl Ether, Isopropanol and Titanium Dioxide, White, Slight Alcohol Odor/Scent, -200 to 400 deg F, 1.41 Specific Gravity, 77 deg F Flash Point, 246 g/L VOC, Bonds To: Metal, Plastic
MASTERS® PRO-DOPE® is a non-toxic, non-corrosive, non-hardening paste. It effectively seals both metal and plastic threaded connections. It will not dry out, stain, harden or separate. Lubricates during assembly and can easily be disassembled even after years of service. MASTERS® PRO-DOPE® effectively seals most liquids and gases against leakage to 10000 psi and from -200 to 400 deg F (-129 to 204 deg C).
- Effectively seals most liquids and gases against leakage to 10000 psi and from -200 to 400 deg F (-129 to 204 deg C)
- Low VOC
- MASTERS® PRO-DOPE® is recommended for acids (dilute), air (compressed, gaseous), aliphatic solvents, alkalis (dilute), ammonia, brine, carbon dioxide, castor oils, caustic alkali (dilute), corrosives, diesel fuel oil, gasoline, heating oils, helium (gaseous), hydraulic oils, inert gases (gaseous), jet fuel, kerosene, liquefied petroleum gases, manufactured gases, mineral oils, natural gas, nitrogen (gaseous), oils, petroleum solvents, potable water, propane, refrigerant, steam, sugar (liquid)
Product Details
MASTERS® PRO-DOPE® PTFE Pipe Thread Sealant, Brush Top Cap Container, 500 mL Container, Composition: Crystalline Silica, Quartz, Propylene Glycol N-Butyl Ether, Isopropanol and Titanium Dioxide, White, Slight Alcohol Odor/Scent, -200 to 400 deg F, 1.41 Specific Gravity, 77 deg F Flash Point, 246 g/L VOC, Bonds To: Metal, Plastic
MASTERS® PRO-DOPE® is a non-toxic, non-corrosive, non-hardening paste. It effectively seals both metal and plastic threaded connections. It will not dry out, stain, harden or separate. Lubricates during assembly and can easily be disassembled even after years of service. MASTERS® PRO-DOPE® effectively seals most liquids and gases against leakage to 10000 psi and from -200 to 400 deg F (-129 to 204 deg C).
Features
- Effectively seals most liquids and gases against leakage to 10000 psi and from -200 to 400 deg F (-129 to 204 deg C)
- Low VOC
- MASTERS® PRO-DOPE® is recommended for acids (dilute), air (compressed, gaseous), aliphatic solvents, alkalis (dilute), ammonia, brine, carbon dioxide, castor oils, caustic alkali (dilute), corrosives, diesel fuel oil, gasoline, heating oils, helium (gaseous), hydraulic oils, inert gases (gaseous), jet fuel, kerosene, liquefied petroleum gases, manufactured gases, mineral oils, natural gas, nitrogen (gaseous), oils, petroleum solvents, potable water, propane, refrigerant, steam, sugar (liquid)