Welcome to our new website! If you run into any problems or have feedback to share, feel free to email us at [email protected] - we truly value your input!
content loaded
OATEY 11830 GALVANIZED SOLAR FLASHING .5 - 1IN
MFR Part #: 11830
SKU #: 1215910
Brand: Oatey®
UPC: 38753118307
Oatey® No-Calk® 11830 Roof Flashing, Steel, 1/2 to 1 in Pipe, 9 in W x 12-1/2 in L Base
Limited
For commercial and residential applications that require a watertight seal around the plumbing vent
IAPMO Listed|NES 653|UPC Listed|PROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Product Details
Attributes
Features
Resources
Oatey® No-Calk® Roof Flashing, 12-1/2 in Base Length, 9 in Base Width, 1/2 to 1 in Pipe, Steel, Hot Dipped Galvanized
Oatey® Galvanized No-Calk® Roof Flashings/Solar Flashing are designed for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
Base Length:12-1/2 in
Base Width:9 in
Country Of Origin:US
Finish:Hot Dipped Galvanized
Material:Steel
Pipe Size:1/2 to 1 in
- 28 ga galvanized steel base
- Collar seals pipe ranging from 1/2 to 1 in to accommodate solar panel mounting system posts
- Rated 180 deg F continuous heat and approved for type "B" installations
- Metal base for pitch from 0 to 40 deg or upto 10/12 roof
- Self-sealing collar slides over pipe and requires no caulking
- Collar will not fade
- Do not use petroleum based products or paint on flashing collar or plastic base
- Not for hot-mopped or built-up roof
Product Details
Oatey® No-Calk® Roof Flashing, 12-1/2 in Base Length, 9 in Base Width, 1/2 to 1 in Pipe, Steel, Hot Dipped Galvanized
Oatey® Galvanized No-Calk® Roof Flashings/Solar Flashing are designed for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
Attributes
Base Length: 12-1/2 in
Base Width: 9 in
Country Of Origin: US
Finish: Hot Dipped Galvanized
Material: Steel
Pipe Size: 1/2 to 1 in
Features
- 28 ga galvanized steel base
- Collar seals pipe ranging from 1/2 to 1 in to accommodate solar panel mounting system posts
- Rated 180 deg F continuous heat and approved for type "B" installations
- Metal base for pitch from 0 to 40 deg or upto 10/12 roof
- Self-sealing collar slides over pipe and requires no caulking
- Collar will not fade
- Do not use petroleum based products or paint on flashing collar or plastic base
- Not for hot-mopped or built-up roof