warningTo view other suggested products,
GRUNDFOS 96402750 Image 1
GRUNDFOS 96402750 Image 2
content loaded
GRUNDFOS 96402750 Image 1

1/3HP 208V 3PH CI 3SP CRC PUMP 96402750 GRUNDFOS UPS40-40/4

MFR Part #: 96402750
SKU #: 3070935
Brand: Grundfos
UPC: 5700390680077
Grundfos 96402750 UP Series Canned Rotor Circulator Pump, 43.2 gpm Flow Rate, 208 to 230 V AC, 3 Phase
85905824 Motor
1 and 2-Pipe Heating Systems, Main Pumps, Zone Pumps, Boiler Shunt Pumps, Pumps for Heating Surfaces, Calorifiers, Underfloor Heating Systems, Solar Heating Systems, Heat Pump Systems, Geothermal Heating Systems, Heat Recovery Systems, 2-Pipe Air-Conditioning Systems and Pumps for Refrigeration Units
ASTM 35 B - 40 B | cUL Listed

Grundfos, 96402750, Circulator Pump, Canned Rotor, Series: UP Series, 43.2 gpm Flow Rate, 13.12 ft Maximum Head, 186 W Power, 208 to 230 V AC, 0.36 to 0.83 A, 60 Hz Frequency, 3 ph, 145 psi Maximum, 1750 rpm Motor, 304 Stainless Steel Impeller, 140 deg F, IPX4D Enclosure, Ceramic Radial/Carbon Thrust Bearing, 12 in W x 13-1/2 in H Dimensions

UPS pumps constitute a complete range of 3-speed circulator pumps, available both in 50 and 60 Hz. The pumps can be used in both open and closed systems. UPS pumps are of the canned rotor type, i.e. pump and motor form an integral unit without a shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.

Product Details

Grundfos, 96402750, Circulator Pump, Canned Rotor, Series: UP Series, 43.2 gpm Flow Rate, 13.12 ft Maximum Head, 186 W Power, 208 to 230 V AC, 0.36 to 0.83 A, 60 Hz Frequency, 3 ph, 145 psi Maximum, 1750 rpm Motor, 304 Stainless Steel Impeller, 140 deg F, IPX4D Enclosure, Ceramic Radial/Carbon Thrust Bearing, 12 in W x 13-1/2 in H Dimensions

UPS pumps constitute a complete range of 3-speed circulator pumps, available both in 50 and 60 Hz. The pumps can be used in both open and closed systems. UPS pumps are of the canned rotor type, i.e. pump and motor form an integral unit without a shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.

Attributes

Clearance Items: Clearance
HP Rating: 1/3 hp
Maximum Head: 13.12 ft
Type: Canned Rotor
Voltage Rating: 208 to 230 V AC
Amperage Rating: 0.36 to 0.83 A
Bearing Type: Ceramic Radial/Carbon Thrust
Enclosure Type: IPX4D
Flow Rate: 43.2 gpm
Frequency Rating: 60 Hz
Impeller Type: 304 Stainless Steel
Maximum Pressure: 145 psi
Motor Speed: 1750 rpm
Power Rating: 186 W
Temperature Rating: 140 deg F

Features

  • Maintenance-free
  • Low noise and low energy
  • Complete range and wide range of accessories
  • Stainless steel rotor can, bearing plate and rotor cladding
  • Aluminum alloy stator housing
  • Stator with built-in thermal switch
  • Non-electronically controlled circulator pumps for domestic building with speed control
  • 1-1/2 in Non ANSI 2 bolt with (2) 1/2 in Dia holes
  • Flange pipe connection
  • Cast iron pump housing
  • Large stator
  • 3-speed motor

Resources

Catalog
Instruction/Installation Manual
Specification Sheet